Wednesday, September 30, 2015

Transfers ~ My First!

I'm sure many of you have done all sorts of things with transfers.  I'm referring to taking a printed image and transferring it to polymer to be used in a variety of ways.  I did try the process myself a couple of years ago, but didn't have much success.  I tried a variety of printers, papers and processes, and nothing seemed to come out just right.  So, I figured perhaps it wasn't "my thing."  After all, there are soooo many techniques and processes you can do with polymer, not doing one wasn't the end of the world....Or was it?

The impetus to try again came the other day when I ran across some really lovely digital images on Etsy.  I was particularly taken with fall leaves - so appropriate for this time of year - and with some Japanese style art.  So, I decided to give transfers a try again.

I'm so glad I did!

You'll see sprinkled about this post the first pieces I've made. The images came out sharp and clean and I'm quite pleased with the results.  The two pendants to the right I mounted on another sheet of clay.  The red leaf image has a Magic Gloss resin finish while the pendant on the left has a light protective coat of Preserve Your Memories II.

The process:  I used my laser printer and digital images purchased with "permission to use" rights.  You'll find all sorts of images that can be used legally on the Internet, and Etsy is an especially great source.  Some of the images in original form were too large or too small, so I used my computer to alter the size.  I printed the images on a good quality copy paper, but nothing fancy, thick or special.

My base clay is a combination of white and translucent.  I did a lot of finger rubbing with good pressure accompanied by using rubbing alcohol to dampen the paper but not get it soggy.  The process takes a little while, but when the paper peels off completely white, and the image is on the clay in all its original glory, it's quite a thrill.

 You do have to use the clay pieces pretty quickly, since the image and the clay are tacky.  The baking process really seemed to seal the image to the clay.

 I have some more ideas about ways to use or enhance transfer images, so keep checking back.


  1. These are beautiful. What kind of color laser printer do you have?

    1. Hi, Mary Kaye. Thank you for your kind words. I have a Brother color laser printer. It is about 4 or 5 years old and uses 4 individual toner cartridges. The color is very true and clean.